Related articles.The Dell XPS 13 Late 2016 (9360) is the fourth-generation model of the XPS 13 line. The laptop is available since October (pre-2017 model) in both a standard edition with Windows installed as well as both a pre-2017 model and a 2017 model (with insignificant hardware differences) Developer Edition with Ubuntu 16.04 'SP1' installed, featuring kernel 4.8 as of now. There is only minor hardware differences between them, mostly in regards to the mainboard microchip manufacturers. Just like the older versions (, and ) it is available in different hardware configurations as well. These fourth gen models includes Intel's Kaby Lake CPUs and advertised with up to 16GB LPDDR 1866 MHz RAM and a 1TB PCI SSD.

Sep 15, 2014  Manual Installation of a Dell Driver Pack on a local machine If you've ever had to re-load a laptop from scratch, you know that it can be a pain to have to re-install all of the systems drivers one by one and can take hours to do so. After digging into different ways to.

It will now also be available in Rose Gold. Prior to previous information and current specifications available provided by Dell (at least to regular customers), it is not available with the 2133 MHz RAM speed. However, in some models, including those available to employees and possibly Dell partners (and/or business customers), memory speed is indeed available up to 2133 Mhz LPDDR3 (non-upgradable). The same mentioned models are also available with the Intel Core i7-7660U (aswell as i7-7560U) with the Intel 640 Iris Plus onboard graphics.

Soundcloud bot keygen crack free. Top 4 Download periodically updates software information of soundcloud bot full versions from the publishers, but some information may be slightly out-of-date. Using warez version, crack, warez passwords, patches, serial numbers, registration codes, key generator, pirate key, keymaker or keygen for soundcloud bot license key is illegal. SoundCloudAutomator is the industry's most advanced Soundcloud bot to systematically grow your Soundcloud audience. Works by automating the tasks you normally do on Soundcloud: following users, unfollowing users, commenting, messaging users, playing tracks and other features that will greatly enhance your exposure on Soundcloud. GET Soundcloud Manager Cracked – Latest Version Crack. By admin / June 12, 2017 March 18, 2018. SoundcloudManager is the #1 Soundcloud Bot for good reason. It is the most feature rich Soundcloud Promotion tool and provides a level of control and flexibility unheard of in other products.

Respective clock frequencies are 2.5 Ghz (up to 4GHz in Turbo-mode) and 2,4 Ghz (up to 3.8 Ghz), respectively.The installation process for Arch on the XPS 13 does not differ from any other PC. For installation help, please see the. This page covers the current status of hardware support on Arch, as well as post-installation recommendations.As of kernel 4.5, the Intel Kaby Lake architecture is supported.

Contents.Content Adaptive Brightness ControlIn the XPS 13 the display panels (both FHD and QHD+) come with Content Adaptive Brightness Control (usually referred to as CABC or DBC) embedded in the panel firmware - it adjusts the screen brightness depending on the content displayed on the screen. While it saves a bit of power, it is generally undesirable, especially for Linux users who are likely to be switching between dark and light screen content. Dell has issued a fix for this, however it is only available to run in Windows. The fix is available.To test if your XPS 13 is affected by the CABC, go to this. It is possible to apply Dell's firmware update using a portable Windows 10 on a USB device:.

Install (for example) AUR. Download a Windows 10 ISO from. Create a portable Windows 10 installation. Boot the XPS 13 from your Windows 10 USB device (F12). In Windows, download and install the latest driver for the.

Then download and install to update the panel firmware. The tool gives you the option to disable CABC. Reboot (from USB). Reboot to Arch Linux and rerun thePower SavingIt's possible to save around 10/20% energy with some tricks.

The SD card adapter can be disabled in BIOS settings to save 0.5W. It's possible to undervolt the CPU and GPU with.

Each individual CPU requires manual tweaking - no well-known good values exist for any models, even for the same CPU model. GPU can consume less power with the i915.enablefbc=1 kernel module parameter (see for more details). Other known good options are enabled by default on 5.3+ kernel versions.NVM Express SSDFor some devices it might be necessary to set a higher value for the nvmecore.defaultpsmaxlatencyus parameter to enable all power saving states. This parameter has to be set on the.For the Toshiba 512GB SSD used in some models of the XPS 13 the value to enable all states is 170000 (the combined latency of entering and leaving the highest power state, add nvmecore.defaultpsmaxlatencyus=170000 to your kernel command line). For the 1TB SSD this valued should be increased to 180000 instead. Warning: BIOS version 2.9.0 is known to make the Killer WiFi extremely unstable - update to at least version 2.10.0 before proceeding.The Killer 1535 Wireless Adapter is functional and the required ath10k firmware is included in but the hardware/firmware/driver is unstable and buggy on Linux. The connection speed reported by iw is limited to 1-6Mbits/s.

However this is just the output being wrong. The real connection speed is not limited to this value., regardless of the OS, where the connection is dropped under heavy load but reconnects after a moment. This might not be noticed during browsing at all but becomes apparent in online games. Signs of this problem seems to be two kinds of messages in dmesg:pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Data Link Layer, id=00e4(Transmitter ID)pcieport 0000:00:1c.4: device 8086:9d14 error status/mask=0002000pcieport 0000:00:1c.4: 12 Replay Timer TimeoutAnd also:CPU: 3 PID: 1410 Comm: irq/133-ath10k Not taintedHardware name: Dell Inc.

XPS 13 9360/0839Y6, BIOS 2.1.0 Call Trace:dumpstack+0x63/0x82warn+0xcb/0xf0warnslowpathnull+0x1d/0x20netrxaction+0x274/0x3a0? Note: If you still encounter issues, installing an alternative WiFi M.2 2230 card like Intel AC-8265 (b/g/n/AC 20/40/80Mhz 867Mbps+Bluetooth 4.2) or Intel AC-9260 (b/g/n/AC/6 20/40/80/160Mhz 1.73Gbps + Bluetooth 5.0) might be needed. BluetoothAfter following the instructions given at tethering of internet connections via phone works immediately.See when having issues with Bluetooth and suspend (blinking CapsLock).Thunderbolt 3 / USB 3.1The USB-C port supports Thunderbolt 3, Displayport-over-USB-C and USB power delivery as well as USB 3.1.Ethernet repeatedly disconnects/reconnects with Dell USB-C adapter (DA200)Use of a power management package (such as ) may cause the ethernet adapter to repeatedly disconnect and reconnect. If this happens, disable/blacklist USB autosuspend for the ethernet adapter. (On my laptop, this is the device Bus 004 Device 007: ID 0bda:8153 Realtek Semiconductor Corp in the output of lsusb.)USB-C Compatibility Chart. Note: A comprehensive and up to date list of USB type C adapters and hubs is present in the page.

Thunderbolt Firmware updatesThe thunderbolt controller in the laptop has an embedded firmware. The laptop ships with firmware version NVM 18, and the most recent available version from Dell's website is NVM 26.

If encountering compatibility problems with Thunderbolt accessories (such as the DA-200), the firmware may need to be updated. If you have fwupd (see: ) set up then you should receive this update automatically. Otherwise, you can install it manually as follows.Dell maintained a github repository with the firmware, but abandoned it now that the firmware is on LVFS. The current version is available as 0x075Bsecure.bin (or 0x082A for newer model, see instructions below) inside the. This can be extracted with.Here is a short list of steps to update the Thunderbolt-Firmware on linux 4.13+ (use at your own risk):.

Force enable the thunderbolt controller (or plug in a device to enable it)# echo 1 sudo tee /sys/bus/wmi/devices/86CCFD48-205E-4A77-9C48-2021CBEDE341/forcepower. Check your model ID. If it's 0x082A, use the 0x082A firmware instead of the 0x075B one.# cat /sys/bus/thunderbolt/devices/0-0/device. Flash the 9360 firmware from the thunderbolt-nvm-linux repository to a non active NVME memory spot# dd if=payloads/0x075B.bin of=/sys/bus/thunderbolt/devices/0-0/nvmnonactive0/nvmem. Trigger the update process# echo 1 /sys/bus/thunderbolt/devices/0-0/nvmauthenticate. At this point, your screen should flickr a couple of time.

Verify that the update is done by checking that authenticate returns 0# cat /sys/bus/thunderbolt/devices/0-0/nvmauthenticate. Verify the new nvme version (it should return 26.1)# cat /sys/bus/thunderbolt/devices/0-0/nvmversion. Put the controller back in normal mode# echo 0 sudo tee /sys/bus/wmi/devices/86CCFD48-205E-4A77-9C48-2021CBEDE341/forcepowerSATA controllerWhen the SATA-controller is set to RAID On in BIOS, the SSD is not recognized, because the kernel does not support remapped AHCI device, see. Set to AHCI before attempting to install Arch.TouchpadThe touchpad has no explicit buttons. The button is built into the pad's surface. There is a small line printed on the pad separating left/right click areas, and libinput does the same separation in software.Libinput also provides a middle button – to issue a middle click, simply press on the middle area right between the virtual left and right buttons (i.e.

On the small printed separator line).Remove psmouse errors from dmesgIf dmesg grep -i psmouse returns an error, but your touchpad still works, then it might be a good idea to disable psmouse. First create a config file:# nano /etc/modprobe.d/modprobe.confblacklist psmouseThen add this file to /etc/mkinitcpio.conf.FILES=(/etc/modprobe.d/modprobe.conf).Rebuild your initial ramdisk image (see ).TouchscreenThe touchscreen works without additional configuration.

The bug resulting in a disabled touchscreen after resume was fixed with kernel 4.8.5.GesturesRefer to for information about the current development state and available methods.Scrolling in FirefoxSee. This enables both touchscreen scrolling and high-res trackpad scrolling.Keyboard BacklightBy default, the keyboard backlight turns off after 10 seconds of inactivity. Some users might find this too short and annoying.The delay can be increased (or decreased) by editing this file:/sys/devices/platform/dell-laptop/leds/dell::kbdbacklight/stoptimeoutYou can also change the brightness (0-2) by editing the following file. This is identical to pressing F10 on your keyboard:/sys/devices/platform/dell-laptop/leds/dell::kbdbacklight/brightnessHidden Keyboard KeysThere are additional Fn+ (sequences) that are not marked at all on the keyboard but underlying hardware generates them anyway. Here they are (if you find more add them to the table below):Hidden Fn KeysFn+Resulting key (sequence)Fn+InsXF86SleepFn+SuperLSuperRFn+BPauseFn+RPrintFn+SScrollLockFn+A / D / E / F / G / T / Q / WXF86Launch3Unobtrusive modeIf enabled in BIOS, pressing Fn+F7 will disable sound, keyboard and screen backlight, the charging LED and the LED on the power button. Unfortunately there seems to be no way to disable just the LEDs- some users recommend black electrical tape.The output of `smbios-token-ctl -d` only list changes related to screen, keyboard and sound when unobtrusive mode is active.Firmware UpdatesDell provides firmware updates via. In order to update the BIOS make sure to also install the optional dependency.

Please note if you have used a bind mount partition for /boot or are booting via legacy BIOS/CSM instead of UEFI, you will not be able to use the fwupd utility - instead use the method below.Alternatively, the BIOS update can be downloaded from the (filter by 'BIOS') and placed in a location accessible to the firmware. This could be the '/boot' folder, or a FAT32 formatted USB stick. Then restart your laptop and hit F12 while starting.

In the boot menu choose firmware update and select the downloaded file.Sleep to idle (s2idle, S0ix)According to the method described in an, this device supports Low Power S0 Idle (S0ix).To try S0ix, write freeze to /sys/power/state (see ). The system should behave like it is sleeping, except the power button light is on. Press power button to wake up.S0ix can be used as an alternative to 'Sleep to RAM', by changing the following systemd configuration:/etc/systemd/sleep.conf SleepSuspendState=freeze mem standbyYou may need to prevent the xHCI controller from waking up the system. Write XHC to /proc/acpi/wakeup, or write disabled to /sys/devices/pci00:00:14.0/power/wakeup. Different models may have different PCI ID for the xHCI controller, see the 4th column of grep XHC /proc/acpi/wakeup.To make the change permanent, put a file to /etc/tmpfiles.d:/etc/tmpfiles.d/disable-xhci-wakeup.conf w /sys/devices/pci00:00:14.0/power/wakeup -disabledIf you want to enable waking up by key press:/etc/tmpfiles.d/enable-key-press-wakeup.conf # Enable key press to wakeupw /sys/devices/platform/i8042/serio0/power/wakeup -enabled Troubleshooting EFISTUB does not bootThe BIOS does not pass any boot parameters to the kernel.

Use a UEFI instead.It is possible to work around this issue by bulding single file EFI images containing the parameters. See.Not waking from suspendUpdate the BIOS to 1.0.7 to patch this issue.Power Drain after waking from standbySome users recognised 2W more power consumption after waking up from standby. Go to the UEFI Firmware Settings (tap the F2 key when the Dell logo appears) and uncheck the 'Enable Thunderbolt Boot Support'. You may use or AUR to reproduce and check this behaviour yourself.Popping sound on headphones/external speakersPower saving being enabled on the audio chip will cause the hissing and popping to appear.Have a look at and.If you are using, it will activate power saving by default when on battery.

Edit /etc/default/tlp and disable it.Crackling sound with screen changesSome users experienced a weird crackling, white noise sound when the display is changing its contents after waking the computer from S3 sleep.This issue should be patched as of the 4.14.15 kernel.If you're still encountering this issue, try manually applying this patch. Adding the kernel parameter i915 enableguc=1 as described in might also help, however multiple people have reported that this does not fix the problem completely.Coil WhineUnfortunately Dell still did not fix this issue and the sound for my model was very loud.

The issue seems to be connected to the graphic card. For some users, it is possible to reduce it a lot by activating frame buffer compression 'enablefbc=1'. The coil whine will then start again under heavy graphic load. For the touchscreen model, this may be very often, due to the high resolution screen. In a similar vein, the display can be run at a lower resolution, again reducing the load on the graphics card.Freezing after waking from suspendInstalling AUR is to fix this.When using a bluetooth device (confirmed for a Logitech MX Anywhere 2S and gnome), the computer frequently does not respond and the LED on CapsLock blinks.Using the solution from helps in this case.Continuous hissing sound with headphonesOpen alsamixer and set 'Headphone Mic Boost' gain to 10 dB (See discussion on ). Note that this does reduce the volume slightly.You may also run the equivalent command:$ amixer -c PCH cset 'name=Headphone Mic Boost Volume' 1PulseAudio will rewrite these ALSA settings on each boot. So if you use PulseAudio you may change its config to make the setting permanent:/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf Element Headphone Mic Boostrequired-any = anyswitch = select# Replace 'volume = merge' by:volume = 1override-map.1 = alloverride-map.2 = all-left,all-right/usr/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf Element Headphone Mic Boostswitch = off# Replace 'volume = off' by:volume = 1This change will be overwritten by an upgrade of PulseAudio though.